Pine Products offer a range of H3.2 SG8 structural framing timber in sizes 75x50 all the way up to 300x50.
We offer both rough sawn and dressed posts. Our premium dressed posts are individually wrapped to protect their smooth clean appearance. H4 CCA treatment means this post can be used in-ground making it ideal for decking, pergolas or fences. Made from ex-pruned New Zealand Radiata Pine logs, with an SG8 Structural rating, our posts are superior in quality and strength.
| Description | Size (mm) | Treatment / Grade | Length | Pack Size | Notes |
| SG8 RAD | 70x45 | H3.2 KD PG | 3.6m /4.2m /4.5m / 4.8m / 5.4m / 6m | 120 pcs | |
| SG8 RAD | 90x45 | H3.2 KD PG | 3.6m /4.2m /4.5m / 4.8m / 5.4m / 6m | 69 pcs | |
| SG8 RAD | 140x45 | H3.2 KD PG | 3.6m /4.2m /4.5m / 4.8m / 5.4m / 6m | 60 pcs | |
| SG8 RAD | 190x45 | H3.2 KD PG | 3.6m /4.2m /4.5m / 4.8m / 5.4m / 6m | 48 pcs | |
| SG8 RAD | 240x45 | H3.2 KD PG | 3.6m /4.2m /4.5m / 4.8m / 5.4m / 6m | 36 pcs | |
| SG8 RAD | 290x45 | H3.2 KD PG | 3.6m /4.2m /4.5m / 4.8m / 5.4m / 6m | 18 pcs | |
| SG8 RAD | 140x45 | H3.2 WAT PG | Random length heavy 4.5m / 4.8m | 60 pcs |
Wet after Treatment |
| Description | Size (mm) | Treatment / Grade | Length | Pack Size | Notes |
| POST | 88x88 | H4 KD RHD | 1.8m / 2.4m / 3m / 3.6m / custom | 32 pcs |
Clear on all four faces with the occasional minor blemish permissible as per N.Z. Timber Grading Rules NZS 3631:1988. Typical
end uses include mouldings, dressed boards, panelling, and products that require a stained finish.
A near clear grade used in decking which allows for a small number of tight defects on the best face and edges. Backface allows occasional large or broken knot defects and some hit and miss dressing.
SG8 dry is a structural grade ex pruned log that allows tight and live knot defects. Suitable for Lintels, floor joists, roof beams, general framing, trusses, decking joists, Verandah posts, Pergola and other outdoor applications.
Contains the next layer of wood beyond the core of the log. Grading allows heartwood and any number of knots and defects which are generally sound and tight (inter-grown). Grading allows for a small amount of pith (less than 10% of the length), cone hole, needle trace, light to moderate resin, light blue stain and wane on up to 30% of the edge. Cluster and spike knots are allowed as long as structurally sound. Grading does not allow pith (greater than 10% of length), dead knots, decaying timber and broken pieces.
Contains the core (pith) of the log and surrounding heavy heartwood zone. Grading allows any amount of pith, spiral grain, large knots, broken knots, spike and cluster knots. Grading allows cone hole, needle trace, resin pockets, moderate blue stain and wane on 50% of edges. Grading does not allow decay, broken and fallen knots bigger than half the width, heavy blue stain, and pieces of timber that do not hold together (are not structurally sound).
H3.1 --- Outside, above ground, periodic wetting but where the timber can dry out; some leaching. Requires painting for ongoing protection.
H3.2 --- Outside above ground, periodic wetting but where the timber can dry out; some leaching
H4 --- In or on the ground subject to severe wetting and leaching
H5 --- In or on the ground subject to severe wetting and leaching, with or in freshwater
WAT --- Wet After Treatment
UT --- Untreated
GS --- Green Sawn
KD --- Kiln Dried
R/S --- Rough Sawn
DAR --- Dressed
D4S --- Dressed four sides
RHD --- Rougher Headed
P/G --- Planer Gaued
G/T --- Grip Tread
T & G --- Tongue & Groove
SG8 Dry
Premium Post
